Video Training Catalog
Whether you need to train on a few topics or many of them, J. J. Keller® Training delivers.
Browse the full library of training videos below. Please contact megan@truserveins.com to order.
Sexual Harassment Prevention: (Module 7) Additional Training for Retail Environments
Formats
: E-Learning and Streaming Video
Intended Audience
: Any level associate in a retail workplace environment
Copyright Date
: 2019
Languages
: English
E-Learning Length
: 20 minutes
Video Run Time
: 11:35
E-Learning Product Code
: English: 58978 | Spanish: 58979
Video Product Code
: English: 59022 | Spanish: 59023
Nearly one in six charges of sexual harassment filed with the Equal Employment Opportunity Commission (EEOC) comes from the retail industry1. Due to the public-facing and decentralized nature of the work, retail employees are uniquely vulnerable to sexual harassment. These experiences can take an emotional, psychological, and physical toll on employees, resulting in high turnover, low morale, and lost productivity. In addition, companies that fail to address claims of sexual harassment can suffer costly court cases, negative publicity, and reputation damage.
There are multiple definitions of sexual harassment, and all of them contain a degree of subjectivity. Recognize that sexual harassment is not a black and white issue because it involves subjective experiences. This training session will help you identify behaviors that constitute sexual harassment and techniques you can use in response to those behaviors in order to help keep your workplace respectful and safe.
Sexual Harassment Prevention: Additional Training for Retail Environments is designed to help identify and respond to sexual harassment in the retail industry. Specifically, this training will teach employees how to recognize illegal behavior from coworkers and customers, and how to respond in the unfortunate event that it does occur.
1https://www.americanprogress.org/issues/women/news/2017/11/20/443139/not-just-rich-famous/
After completing this course, learners will be able to:
- Recognize Normalizing in the retail industry
- Explain how to respond to harassment by choosing an appropriate IDEATM Anti-Harassment Action
Sexual Harassment Prevention: Additional Training for Retail Environments covers the following topics:
Sexual Harassment Prevention
- It Can Happen Anywhere
- Recognize Normalizing
- Bystander
- IDEATM Anti-Harassment Actions
Slips, Trips, and Falls: Hazard Perception Challenge
Formats
: E-Learning and Streaming Video
Regulations Covered
:
29 CFR 1910 Subpart D
Intended Audience
: Any employee susceptible to slips, trips, and falls in the workplace.
Copyright Date
: 2015 (Rev. 2019)
Languages
: English
E-Learning Length
: 45 minutes
Video Run Time
: 36:11
E-Learning Product Code
: English: 42426 | Spanish: 73067
Video Product Code
: 43216
According to the Bureau of Labor Statistics, slips, trips, and falls constitute the majority of workplace accidents. And every year the cost of these injuries to employers is in the billions. Tragically, slips, trips, and falls account for a sizeable percentage of annual workplace fatalities.
This hazard perception course is designed to increase employee awareness of slip, trip, and fall hazards, and to foster proactive responses wherever hazards exist.
After completing this program, learners will be able to:
- Describe the difference between slips/trips and falls
- Recognize what causes slips, trips, and falls to occur
- Describe how to appropriately respond to hazards in the workplace
Slips, Trips, & Falls: Hazard Perception Challenge covers the following topics:
- Housekeeping
- Ladders & Stairs
- Elevated Surfaces & Floor Openings
Stormwater Management - Construction General Permit: Control Measures and Corrective Actions
Formats
: E-Learning and Streaming Video
Regulations Covered
:
40 CFR §122
Intended Audience
: Operators, Inspectors, and all other Stormwater Team members.
Copyright Date
: 2023
Languages
: English
E-Learning Length
: 20 Minutes English/21 Minutes Spanish
Video Run Time
: 17:06 English/20:30 Spanish
E-Learning Product Code
: English: 72821 | Spanish: 72822
Video Product Code
: English: 72837 | Spanish: 72838
Rainwater washes over the loose soil on a construction site when it storms. This moving water, or runoff rainwater, is called stormwater. It can carry with it various materials and products stored outside. It can also pick up pollutants like sediment, debris, and chemicals from the loose soil. This polluted stormwater can make its way to nearby storm sewer systems or directly into rivers, lakes, or coastal waters.
This training is designed to teach Stormwater Team members about the control measures required by the CGP. It will also cover the requirements for taking corrective action when certain conditions are identified at your site.
NOTE: This training is offered as a part of a more comprehensive curriculum on this topic.
After completing this training, learners will be able to:
- Identify the control measures required to meet effluent limitations
- Recognize effective design, installation, and maintenance of control measures
- Explain when and how to complete and log corrective actions
Stormwater Management Training - Construction General Permit: Control Measures and Corrective Actions covers the following topics:
Control Measures
- Erosion and Sediment Controls
- Pollution Prevention Controls
- Construction Dewatering Controls
- Water Quality Controls
- Design, Installation, and Maintenance
Corrective Actions
- Conditions Triggering Corrective Action
- Corrective Action Deadlines
- Corrective Action Log
- Spill Response Guidelines
Stormwater Management - Construction General Permit: Inspections and Recordkeeping
Formats
: E-Learning and Streaming Video
Regulations Covered
:
40 CFR §122
Intended Audience
: Operators, Inspectors, and all other Stormwater Team members.
Copyright Date
: 2023
Languages
: English
E-Learning Length
: 20 Minutes English/21 Minutes Spanish
Video Run Time
: 9:55 English/11:15 Spanish
E-Learning Product Code
: English: 72823 | Spanish: 72824
Video Product Code
: English: 72839 | Spanish: 72840
Rainwater washes over the loose soil on a construction site when it storms. This moving water, or runoff rainwater, is called stormwater. It can carry with it various materials and products stored outside. It can also pick up pollutants like sediment, debris, and chemicals from the loose soil. This polluted stormwater can make its way to nearby storm sewer systems or directly into rivers, lakes, or coastal waters.
Part 6.3 of the CGP regulations states those performing inspections must be trained. This training is designed to help you meet this training requirement. It will also teach you how to complete the required reports and documentation for inspections.
NOTE: This training is offered as a part of a more comprehensive curriculum on this topic.
After completing this training, learners will be able to:
- Identify who is qualified to perform site inspections
- Explain when and how to conduct inspections
- Describe what information must be included in inspection reports and documentation
Stormwater Management Training - Construction General Permit: Inspections and Recordkeeping covers the following topics:
Site Inspection Requirements
- Responsible Parties
- Inspection Frequency
- Areas to Inspect
- Inspection Requirements
Recordkeeping
- Inspection Reports
- Report Accessibility and Retention
Stormwater Management - Construction General Permit: Pollution Prevention Planning
Formats
: E-Learning and Streaming Video
Regulations Covered
:
40 CFR §122
Intended Audience
: Operators, Inspectors, and all other Stormwater Team members.
Copyright Date
: 2023
Languages
: English
E-Learning Length
: 20 Minutes English/21 Minutes Spanish
Video Run Time
: 15:31 English/18:08 Spanish
E-Learning Product Code
: English: 72809 | Spanish: 72810
Video Product Code
: English: 72835 | Spanish: 72836
Rainwater washes over the loose soil on a construction site when it storms. This moving water, or runoff rainwater, is called stormwater. It can carry with it various materials and products stored outside. It can also pick up pollutants like sediment, debris, and chemicals from the loose soil. This polluted stormwater can make its way to nearby storm sewer systems or directly into rivers, lakes, or coastal waters.
This training is designed to help Stormwater Team members understand their site's eligibility under the CGP. It will also help them identify their responsibilities as part of the Stormwater Team and create a Stormwater Pollution Prevention Plan (SWPPP).
NOTE: This training is offered as a part of a more comprehensive curriculum on this topic.
After completing this training, learners will be able to:
- Recognize eligible conditions for Construction General Permit coverage
- Identify the Stormwater Team's responsibilities
- Explain what information is required in the SWPPP
Stormwater Management Training - Construction General Permit: Pollution Prevention Planning covers the following topics:
Construction General Permit Requirements
- Permit Eligibility and Coverage
- Requirement to Post a Notice of Your Permit Coverage
- Stormwater Team
Stormwater Pollution Prevention Plan (SWPPP)
- Project and Site Information
- Site Map
- Description of Stormwater Controls
- Procedures for Inspection, Maintenance, and Corrective Action
- Compliance with Other Requirements
- Availability of SWPPP
- Modifications to the SWPPP
Stormwater Management - Multi-Sector General Permit: Control Measures and Corrective Actions
Formats
: E-Learning and Streaming Video
Regulations Covered
:
40 CFR §122
Intended Audience
: Operators, Inspectors, and all other employees working in an industrial area exposed to stormwater.
Copyright Date
: 2023
Languages
: English
E-Learning Length
: 20 Minutes English/21 Minutes Spanish
Video Run Time
: 15:14 English/17:43 Spanish
E-Learning Product Code
: English: 72829 | Spanish: 72830
Video Product Code
: English: 72845 | Spanish: 72846
Industrial stormwater comes from rainfall or snowmelt runoff that contacts industrial materials. It then runs offsite and enters drainage systems or receiving waters. The Environmental Protection Agency (EPA) requires industrial facilities to have a Multi-Sector General Permit (MSGP) to discharge stormwater. Federal regulations require stormwater discharges associated with specific categories of industrial activity to be covered under NPDES permits. Its main goal is to make sure you manage stormwater in a way that limits pollutants.
This training is designed to teach Stormwater team members about the control measures required by the MSGP. It will also cover the requirements for taking corrective action when certain conditions are identified at their site.
NOTE: This training is offered as a part of a more comprehensive curriculum on this topic. See the description for the Stormwater Management Training - Multi-Sector General Permit Curriculum for additional information.
After completing this training, learners will be able to:
- Identify the control measures required to meet effluent limitations
- Recognize how to design, install, and maintain control measures
- Explain when and how to complete and log corrective actions
Stormwater Management Training - Multi-Sector General Permit: Control Measures and Corrective Actions covers the following topics:
Control Measures
- Minimize Exposure
- Good Housekeeping
- Erosion and Sediment Controls
- Spill Prevention and Response
- Design, Installation, and Maintenance
Corrective Actions
- Conditions Triggering Corrective Action
- Corrective Action Deadlines
- Additional Implementation Measures (AIM)
Stormwater Management - Multi-Sector General Permit: Inspections and Recordkeeping
Formats
: E-Learning and Streaming Video
Regulations Covered
:
40 CFR §122
Intended Audience
: Operators, Inspectors, and all other employees working in an industrial area exposed to stormwater.
Copyright Date
: 2023
Languages
: English
E-Learning Length
: 24 Minutes English/24 Minutes Spanish
Video Run Time
: 22:15 English/25:59 Spanish
E-Learning Product Code
: English: 72831 | Spanish: 72832
Video Product Code
: English: 72847 | Spanish: 72848
Industrial stormwater comes from rainfall or snowmelt runoff that contacts industrial materials. It then runs offsite and enters drainage systems or receiving waters. The Environmental Protection Agency (EPA) requires industrial facilities to have a Multi-Sector General Permit (MSGP) to discharge stormwater. Federal regulations require stormwater discharges associated with specific categories of industrial activity to be covered under NPDES permits. Its main goal is to make sure you manage stormwater in a way that limits pollutants.
This training is designed to help Stormwater team members meet the requirements for inspections and monitoring under Parts 3 and 4 of the MSGP regulations. It will also teach them how to do the required reports and documentation per Part 7 of the permit's requirements.
NOTE: This training is offered as a part of a more comprehensive curriculum on this topic. See the description for the Stormwater Management Training - Multi-Sector General Permit Curriculum for additional information.
After completing this training, learners will be able to:
- Identify who is qualified to perform facility inspections
- Explain when and how to conduct routine inspections, visual assessments, and analytical monitoring
- Describe how to record applicable findings, prepare reports, and keep
Stormwater Management Training - Multi-Sector General Permit: Inspections and Recordkeeping covers the following topics:
Facility Inspection Requirements
- Responsible Parties
- Routine Facility Inspections
- Discharge Visual Assessments
- Analytical Monitoring
- Indicator Monitoring
- Benchmark Monitoring
- Effluent Limitations Monitoring
- State or Tribal Required Monitoring
- Impaired Waters Monitoring
Recordkeeping
- Routine Facility Inspection Documentation
- Discharge Visual Assessment Documentation
- Monitoring Data Recordkeeping Requirements
- Additional Reporting Requirements
Stormwater Management - Multi-Sector General Permit: Pollution Prevention Planning
Formats
: E-Learning and Streaming Video
Regulations Covered
:
40 CFR §122
Intended Audience
: Operators, Inspectors, and all other employees working in an industrial area exposed to stormwater.
Copyright Date
: 2023
Languages
: English
E-Learning Length
: 20 Minutes English/21 Minutes Spanish
Video Run Time
: 17:25 English/20:47 Spanish
E-Learning Product Code
: English: 72827 | Spanish: 72828
Video Product Code
: English: 72843 | Spanish: 72844
Industrial stormwater comes from rainfall or snowmelt runoff that contacts industrial materials. It then runs offsite and enters drainage systems or receiving waters. The Environmental Protection Agency (EPA) requires industrial facilities to have a Multi-Sector General Permit (MSGP) to discharge stormwater. Federal regulations require stormwater discharges associated with specific categories of industrial activity to be covered under NPDES permits. Its main goal is to make sure you manage stormwater in a way that limits pollutants.
This training will help Stormwater team members understand the eligibility requirements for MSGP coverage. It will also help them know their responsibilities to prevent stormwater pollution. It gives an overview of what is needed in the Stormwater Pollution Prevention Plan (SWPPP).
NOTE: This training is offered as a part of a more comprehensive curriculum on this topic. See the description for the Stormwater Management Training - Multi-Sector General Permit Curriculum for additional information.
After completing this training, learners will be able to:
- Recognize eligible conditions for Multi-Sector General Permit coverage
- Identify the Stormwater Pollution Prevention Team's responsibilities
- Explain what information is required in the Stormwater Pollution Prevention Plan
Stormwater Management Training - Multi-Sector General Permit: Pollution Prevention Planning covers the following topics:
Multi-Sector General Permit Requirements
- Permit Eligibility
- Permit Coverage
- Stormwater Pollution Prevention Team
Stormwater Pollution Prevention Plan (SWPPP)
- Site Description
- Summary of Potential Pollutant Sources
- Description of Stormwater Control Measures
- Schedules and Procedures
- Sector-Specific Requirements
- Compliance with Other Requirements
- Modifications to the SWPPP
- Availability of SWPPP
- Certification Requirements
Substance Abuse Training for Employees
Formats
: E-Learning and Streaming Video
Intended Audience
: All Employees
Copyright Date
: 2012 (Rev. 1/18)
Languages
: English
E-Learning Length
: 60 minutes
Video Run Time
: 14 minutes
E-Learning Product Code
: English: 24794| Spanish: 66689
Video Product Code
: English: 41379| Spanish: 41380
Substance abuse in the workplace is a serious issue. It places a major burden on all segments of American society, including the workplace. Drug and alcohol abuse adversely affects morale and productivity on the job and can endanger both the abuser and his or her coworkers.
Employers have enormous potential to protect their businesses from the negative impact of substance abuse by educating employees and encouraging individuals with substance abuse problems to seek help.
This course is designed to help your employees understand the issue of substance abuse in the workplace, how your company's substance abuse policy affects your employees, as well as their role in complying with that policy.
After completing this course, learners will be able to:
- Understand the scope of the problem of substance abuse in the workplace
- Recognize the negative impacts of substance abuse in the workplace
- Identify the policies that companies can put in place to address the issue
- Understand the importance of complying with company substance abuse policies
- Understand how to reduce the danger of substance abuse at work
- Identify the signs of substance abuse in the workplace
- Identify where to seek help for substance abuse issues
The J. J. Keller Substance Abuse Training for Employees online course covers the following topics:
The Scope of the Problem
- Substance Abuse
- Substance Abuse in America
- Substance Abuse in the Workplace
Substance Abuse Policy
- Purpose of the Policy
- Elements of the Policy
- Procedures & Consequences
Prevention
- Understanding Your Company’s Policy
- Compliance
- Signs of Substance Abuse
- Safety Is the Priority
- Seeking Help for Substance Abuse
Vehicle Inspections: Intermodal Chassis
Formats
: E-Learning and Streaming Video
Regulations Covered
:
FMCSR Section 392.7 and 396.13 (pre-trip), 392.9 (on-the-road), 397.17 (tires), and 396.11 (post-trip)
Intended Audience
: All drivers of property-carrying commercial motor vehicles who haul intermodal chassis
Copyright Date
: 2016
Language
: English
E-Learning Length
: 10 minutes
Video Run Time
: 7:10
E-Learning Product Code
: English: 48874 | Spanish: 66690
Video Product Code
: English: 57412
As a professional driver, the Federal Motor Carrier Safety Regulations require you to conduct three types of vehicle inspections on your tractor trailer: a pre-trip, on-the-road, and post-trip inspection. These inspection requirements apply to intermodal equipment, as well.
This program is designed to demonstrate the additional tasks necessary to conduct proper inspections on an intermodal chassis.
After completing this program, learners will be able to:
- Perform inspection duties specific to intermodal chassis
The J. J. Keller Vehicle Inspections: Intermodal Chassis covers the following topics:
Pre-Trip Inspection
- Checking lights
- Checking tires
- Checking tie down bolsters
- Checking securement equipment
- Checking brake systems
- Addressing defects
Other Inspections
- On the road inspections
- Returning the chassis
- Intermodal DVIR
Vehicle Inspections: Refrigerated Trailers
Formats
: E-Learning and Streaming Video
Regulations Covered
:
FMCSR Section 392.7 and 396.13 (pre-trip), 392.9 (on-the-road), 397.17 (tires), and 396.11 (post-trip)
Intended Audience
: All drivers of property-carrying commercial motor vehicles who haul refrigerated trailers
Copyright Date
: 2016
Languages
: English
E-Learning Length
: 15 minutes
Video Run Time
: 8:47
E-Learning Product Code
: 48871
Video Product Code
: 57411
A large number of refrigerated trailers—or simply “reefers” as they are more commonly known—regularly haul temperature-sensitive product from coast to coast. Thorough inspections are crucial—not only to ensure the tractor is in prime condition, but also to confirm the goods in the trailer do not perish.
The Federal Motor Carrier Safety Regulations require you to conduct three types of vehicle inspections: pre-trip, on-the-road, and post-trip inspections. This program is designed to demonstrate the additional tasks necessary to conduct proper inspections on refrigerated trailers.
After completing this program, learners will be able to:
- Perform pre-trip, on-the-road, and post-trip inspection duties specific to refrigerated trailers
The J. J. Keller Vehicle Inspections: Refrigerated Trailers covers the following topics:
Pre-Trip Inspections
- Walk-around inspection
- Looking for external defects
- Checking the inside of the trailer
- Defects to look for
- Preventing cross-contamination
- Checking refrigeration unit
On-the-Road Inspections
- Differences from regular trailer inspections
- Defects to look for
Post-Trip Inspections
- When to shut off the refrigeration unit
- Identifying defects and filling out a DVIR
Vehicle Inspections: Straight Truck Series
Formats
: E-Learning and Streaming Video
Regulations Covered
:
49 CFR 392.7, 392.9, 396.9, 396.11, and 396.13
Intended Audience
: Straight truck drivers
Copyright Date
: 2017
Languages
: English
E-Learning Length
: 15 minutes
Video Run Time
: 13:00
E-Learning Product Code
: 51251
Video Product Code
: 51230
The Straight Truck Series is a collection of training programs which emphasize the essential skills necessary for staying safe on the road while operating a straight truck. This series is appropriate for all levels of truck drivers, from the entry-level to the veteran driver operating any type of straight truck.
Vehicle Inspections is designed to help truck drivers understand the basics of a pre-trip, en-route, and post-trip inspection on a straight truck. Specifically, the importance of routinely inspecting your vehicle even when it may not be required by the regulations.
After completing this course, learners will be able to:
- Conduct a thorough pre-trip, en-route, and post-trip inspection
- Discuss the importance of using the same inspection routine every time they drive
- Explain when a Driver Vehicle Inspection Report (DVIR) is required, and how to complete one
The J. J. Keller's Vehicle Inspections: Straight Truck Series program covers the following topics:
Vehicle Inspections
- Pre-Trip Inspections
- En-Route Inspections
- Post-Trip Inspections
Vehicle Inspections: Tractor Trailers
Formats
: E-Learning and Streaming Video
Regulations Covered
:
FMCSR Section 392.7 and 396.13 (pre-trip), 392.9 (on-the-road), and 396.11 (post-trip)
Intended Audience
: All drivers of property-carrying commercial motor vehicles
Copyright Date
: 2016 (Rev. 12/16)
Languages
: English
E-Learning Length
: 45 minutes
Video Run Time
: 42:03
E-Learning Product Code
: English: 48448 | Spanish: 66645
Video Product Code
: English: 48447
Successful commercial motor vehicle (CMV) drivers must do all they can to avoid accidents, roadside breakdowns and lost road time due to poor vehicle maintenance. Conducting vehicle inspections helps drivers keep their vehicles in working order. Routine vehicle inspections enable drivers to discover unsafe conditions before they cause accidents or crashes, find mechanical problems before they lead to costly breakdowns, prevent being placed out of service during a roadside inspection and avoid being subject to infractions/fines that affect productivity and profits.
This course is designed to help properly prepare property-carrying CMV drivers for conducting pre-trip, on-the-road and post-trip inspections on standard CMVs.
After completing this course, learners will be able to:
- Conduct a thorough pre-trip inspection
- Explain when an on-the-road inspection needs to be done, and how to complete one
- Complete a proper post-trip inspection
- Explain when a Driver Vehicle Inspection Report (DVIR) is required, and how to complete one
- Discuss the importance of using the same inspection routine every time they drive
The J. J. Keller's Vehicle Inspections: Tractor Trailers program covers the following topics:
Pre-Trip Inspections
- Getting Started
- Step 1: Engine Compartment & Front Axle Components
- Step 2: In-Cab Inspection
- Step 3: Lights
- Step 4: Walk-Around
- Step 5: Brakes System Check
On-the-Road Inspections
- When to Perform
- How to Perform
Post-Trip Inspections
- Procedures
- DVIR
Walking-Working Surfaces: What Employees Need to Know
Formats
: E-Learning and Streaming Video
Regulations Covered
:
29 CFR 1910 Subpart D, Subpart I
Intended Audience
: All general industry employees
Copyright Date
: 2017
Languages
: English
E-Learning Length
: 13 minutes
Video Run Time
: 13:18
E-Learning Product Code
: English: 50063 | Spanish: 50614
Video Product Code
: English: 50515 | Spanish: 50514
Slips, trips and falls can happen in any area of any workplace — from the office to the production floor to the loading dock to the warehouse and everywhere in between.
According to the Bureau of Labor Statistics, slip, trip and fall hazards cause the majority of general industry workplace accidents and cost employers billions of dollars each year in lost productivity and business. The good news is that OSHA believes many of these injuries can be prevented by following existing regulations and recommended safe work practices.
OSHA regulates slips, trips and falls under Subpart D, "Walking-Working Surfaces." These requirements apply to all general industry workplaces. It also covers all walking and work surfaces within these workplaces regardless of operations, including floors, aisles, stairs, ladders, platforms, roofs, etc.
This program is designed to help employees understand how they and their job responsibilities may be impacted under the standard.
After completing this course, learners will be able to:
- Recognize the impact of the Walking-Working Surfaces standard
- Identify their own responsibilities in terms of hazard assessments, inspections, fall protection, and training
J. J. Keller's Walking-Working Surfaces: What Employees Need to Know program covers the following topics:
Hazard Assessment
- What's Required of Your Employer
- How It Impacts You
Inspections
- What's Required of Your Employer
- How It Impacts You
Fall Protection
- What's Required of Your Employer
- How It Impacts You
Training
- What's Required of Your Employer
- How It Impacts You
Walking-Working Surfaces: What Supervisors Need to Know
Formats
: E-Learning and Streaming Video
Regulations Covered
:
29 CFR 1910 Subpart D, Subpart I
Intended Audience
: Any level of leadership responsible for ensuring compliance with regard to the new WWS regulations
Copyright Date
: 2017
Languages
: English
E-Learning Length
: 15 minutes
Video Run Time
: 15:52
E-Learning Product Code
: English: 50610 | Spanish: 50615
Video Product Code
: English: 50632 | Spanish: 50631
Slips, trips, and falls can happen in any area of any workplace - from the office to the production floor to the loading dock to the warehouse and everywhere in between. According to the Bureau of Labor Statistics, slips, trips, and falls cause the majority of general industry workplace accidents and cost employers billions of dollars each year in lost productivity and business. The good news is that OSHA believes many of these injuries can be prevented by following existing regulations and recommended safe work practices.
OSHA regulates walking-working surfaces in order to prevent slips, trips, and falls under Subpart D, "Walking-Working Surfaces." These requirements apply to all general industry employers regardless of operations and include floors, aisles, stairways, ladders, platforms, roofs, etc.
Walking-Working Surfaces: What Supervisors Need to Know is designed to help managers and safety personnel understand the Walking-Working Surfaces rule and their responsibilities under the standard.
After completing this training program, learners will be able to:
- Recognize when a hazard assessment is required
- Identify when an inspection is required
- Recognize various fall protection options
- Determine when/if training or re-training is required
- Identify a qualified person(s) to develop and conduct the training
Walking-Working Surfaces: What Supervisors Need to Know covers the following topics:
Hazard Assessment
- What's Required
- How to Comply
Inspections
- What's Required
- How to Comply
Fall Protection
- What's Required
- How to Comply
Training
- What's Required
- How to Comply
Workplace Bullying and Violence: Training for Employees
Formats
: E-Learning and Streaming Video
Intended Audience
: All Employees
Copyright Date
: 2018
Languages
: English
E-Learning Length
: 30 minutes
Video Run Time
: Employee portion: 22:06 | Supervisor Portion: 24:34
E-Learning Product Code
: English: 30137 | Spanish: 66646
Video Product Code
: For Supervisors & Employees - English: 41381
This course will examine workplace bullying and workplace violence. Both cause health, safety, and economic problems for employers and employees.
After completing this course, learners will be able to:
- Distinguish between professional disagreements and workplace bullying or violence;
- Define bullying in the workplace;
- Describe how bullying and violence impact the workplace;
- Recognize warning signs of workplace bullying and workplace violence;
- Identify actions that can be taken to prevent bullying and workplace violence
J. J. Keller's Workplace Bullying and Violence: Training for Employees training program covers the following topic:
- What workplace bullying is
- The different forms of bullying and behaviors that are illegal
- The repercussions of "second hand bullying"
- How bullying can be prevented
- Actions employees can take when if they are a bullying victim or witness someone being bullied
- What workplace violence is, its causes and warning signs
- Actions employees can take to prepare for workplace violence
- The affect of domestic violence on the workplace
Workplace Bullying and Violence: Training for Supervisors
Formats
: E-Learning and Streaming Video
Regulations Covered
:
General Duty Clause OSH Act 5(a)(1)
Intended Audience
: Supervisors, management, and human resource personnel in any industry
Copyright Date
: 2018
Languages
: English
E-Learning Length
: 50 minutes
Video Run Time
: Employee portion: 22:06 | Supervisor Portion: 24:34
E-Learning Product Code
: English: 30136 | Spanish: 66647
Video Product Code
: For Supervisors & Employees - English: 41381
People often equate "bullying" with children, believing that the burden of dealing with such torment disappears after one leaves school. But in reality, bullies can be found in any organization, regardless of size or industry.
As an adult, expressions of anger or other inappropriate conduct should be addressed by the employer as a violation of workplace conduct rules. However, bullying may be subtler. If a pattern of behavior which humiliates or intimidates an employee or otherwise sabotages his or her performance develops, then you may have a bullying situation to deal with.
This course is designed to help supervisors recognize, prevent, and resolve incidents of workplace bullying and violence at their organization.
After completing this course, learners will be able to:
- Summarize the effects bullying has on employees and the organization
- Identify the warning signs of bullying
- Distinguish between "being firm" and "appearing as a bully" themselves
- Respond appropriately to workplace bullying situations
- Reduce the risk of violent incidents
- Recognize and respond to domestic violence
The J. J. Keller Workplace Bullying & Violence Training for Supervisors training program covers the following topics:
Workplace Bullying
- Bullying & the Law
- Size of the Problem
- Warning Signs
- Workplace Conduct
- Taking Action
Workplace Violence
- Introduction to Workplace Violence
- Minimizing Incidents of Workplace Violence
- Domestic Violence
Working with HR
- Involving Human Resources
- Terminating an Employee
Workplace Safety Basics: In Case of an Emergency
Formats
: E-Learning and Streaming Video
Regulations Covered
:
OSHA's General Duty Clause (Section 5(a)(1) of the OSH Act of 1970), 1910.38 (Emergency Action Plans), 1910.151 (Medical Services and First Aid), 1910.1030 (Bloodborne Pathogens), 1910.120 (HAZWOPER), and 29 CFR Part 1904 (Recording and Reporting Occupational Injuries and Illness)
Intended Audience
: New employees for orientation training or any employee in need of a high-level overview of various workplace safety topics
Copyright Date
: 2017
Languages
: English
E-Learning Length
: 15 minutes
Video Run Time
: 52:08
E-Learning Product Code
: English: 51029 | Spanish: 51030
Video Product Code
: English: 49777 | Spanish: 49778
Workplace safety is a shared responsibility between employers and their employees. Under the General Duty Clause, (Section 5(a)(1) of the OSH Act of 1970,) OSHA requires the employer to provide a safe environment for their employees. However, each employee needs to be aware of the potential hazards they may be exposed to, take action to avoid or eliminate them, and report hazards/unsafe conditions as they arise.
Workplace Safety Basics: In Case of an Emergency is designed to provide learners with a high-level overview of a number of workplace safety topics. Specifically, it covers what an employee should do in the event an emergency occurs.
After completing this course, learners will be able to:
- Describe the appropriate actions to take based on their level of authorization in the event of an emergency
Workplace Safety Basics: In Case of an Emergency covers the following topics:
- Emergency Action Plans
- First Aid/Emergency Response
- Bloodborne Pathogens
- HAZWOPER
- Workplace Violence
- Medical Records
Workplace Safety Basics: Safe Use of Equipment
Formats
: E-Learning and Streaming Video
Regulations Covered
:
OSHA's General Duty Clause (Section 5(a)(1) of the OSH Act of 1970), 29 CFR Subpart P (Hand and Portable Powered Tools and Other Hand-Held Equipment), 1910.23 (Ladders), 1910.212 (Machine Guarding - General Requirements for All Machines), 1910.178 (Powered Industrial Trucks), and 1910.147 (Lockout/Tagout)
Intended Audience
: New employees for orientation training or any employee in need of a high-level overview of various workplace safety topics
Copyright Date
: 2017
Languages
: English
E-Learning Length
: 15 minutes
Video Run Time
: 52:08
E-Learning Product Code
: English: 51026 | Spanish: 51028
Video Product Code
: English: 49777 | Spanish: 49778
Workplace safety is a shared responsibility between employers and their employees. Under the General Duty Clause, (Section 5(a)(1) of the OSH Act of 1970,) OSHA requires the employer to provide a safe environment for their employees. However, each employee needs to be aware of the potential hazards they may be exposed to, take action to avoid or eliminate them, and report hazards/unsafe conditions as they arise.
Workplace Safety Basics: Safe Use of Equipment is designed to provide learners with a high-level overview of a number of workplace safety topics. Specifically, it covers an introduction to the safe use of tools and equipment.
After completing this course, learners will be able to:
- Recognize the hazards associated with using tools and equipment and identify safe ways to operate them
Workplace Safety Basics: Safe Use of Equipment covers the following topics:
- Hand & Power Tools
- Ladders
- Machinery
- Powered Industrial Trucks
- Lockout/Tagout
Workplace Safety Basics: Work Environment
Formats
: E-Learning and Streaming Video
Regulations Covered
:
OSHA's General Duty Clause (Section 5(a)(1) of the OSH Act of 1970), 1910.1200 (Hazard Communication), 1910.332 (Electrical Safety Training), 1910.38 (Emergency Action Plans), 1910.39 (Fire Prevention Plans), 1910.146 (Confined Spaces), and 1910.252 (Welding, Cutting, and Brazing – General Requirements)
Intended Audience
: New employees for orientation training or any employee in need of a high-level overview of various workplace safety topics
Copyright Date
: 2017
Languages
: English
E-Learning Length
: 15 minutes
Video Run Time
: 52:08
E-Learning Product Code
: English: 51024 | Spanish: 51025
Video Product Code
: English: 49777 | Spanish: 49778
Workplace safety is a shared responsibility between employers and their employees. Under the General Duty Clause, (Section 5(a)(1) of the OSH Act of 1970,) OSHA requires the employer to provide a safe environment for their employees. However, each employee needs to be aware of the potential hazards they may be exposed to, take action to avoid or eliminate them, and report hazards/unsafe conditions as they arise.
Workplace Safety Basics: Work Environment is designed to provide learners with a high-level overview of a number of workplace safety topics. Specifically, it covers an introduction to various engineering controls that can be used to create a safe work environment.
After completing this course, learners will be able to:
- Identify specific workspace arrangements that help maintain safety in the workplace
Workplace Safety Basics: Work Environment covers the following topics:
- Hazard Communication
- Safety Signs & Tags
- Electrical Safety
- Fire Safety
- Confined Spaces
- Hot Work
- Temperature Extremes